Mitsubishi Electric GT1685 Connection Manual page 171

6.
Change the station number switching device value in the script.
By selecting [Common]
status of the current monitor station, and if it is OFF (standby system), changes the station number switching device
value.
Set the trigger type of the script as [Ordinary] or [Sampling(about 3s)].
• Screen script for Ethernet connection:
// If the host station is not a control station, the station number is switched to that of the other station.
if([b:SM1515]==OFF){
if([w:GD100]==0x0101){
}else{
}
}
For the Ethernet connection, create a script so that the network No. and station number are set to the station
switching device.
For Network No. 1 and Station No. 2, create "[w:GD100]=0x0102".
Set the created script for each screen on the Screen tab.
4.10 Switch the Monitor Target to the Control System Using the Script Function
[Script] [Script], create a script for each monitor screen that checks the SM1515
[w:GD100]=0x0102;
[w:GD100]=0x0101;
4. HOW TO MONITOR REDUNTANT SYSTEM
// Station No. 1 to 2
// Station No. 2 to 1
1
2
3
4
5
6
7
8
4 - 37