Setting Of Energy Measuring Unit/Electric Multi-Measuring Instrument - Mitsubishi Electric GT1685 Connection Manual

19.5 Setting of Energy Measuring Unit/
Electric Multi-measuring Instrument
POINT POINT POINT
Energy measuring
instrument
For details of the energy measuring unit/electronic
multi-measuring instrument, refer to the following
manual.
Energy measuring unit/Electronic multi-
measuring instrument User's Manual
Series
Energy measuring unit
Electric multi-measuring instrument
19.5.1 Connecting to an energy
measuring unit/electronic
multi-measuring instrument

Communication settings
Make the communication settings with the front
operation switch on the energy measuring unit/
electronic multi-measuring instrument.
Item
*1*2
9600bps, 19200bps, 38400bps
Transmission speed
Data Bit 8bits (Fixed)
1bit, 2bits
*2
Stop Bit
(Default: 1bit)
NONE/EVEN/ODD
*2
Parity
(Default: EVEN)
1 to 247
*2
Device address
(Default: 1)
*1 Indicates only the transmission speeds that can be set on
the GOT side.
*2 Adjust the settings with GOT settings.
19 - 10
19. ENERGY MEASURING UNIT/ELECTRIC MULTI-MEASURING INSTRUMENT CONNECTION

19.5 Setting of Energy Measuring Unit/Electric Multi-measuring Instrument

unit/electric multi-measuring
Model name Refer to
EMU4-BD1-MB
EMU4-HD1-MB
19.5.1
ME110SSR-MB
ME96NSR-MB
Set value
19.5.2 Station number setting
In the MODBUS network, a maximum of 31 energy
measuring units/electronic multi-measuring instruments
can be connected to 1 GOT.
Assign a non-overlapped station number ranging from 1 to
247 arbitrarily to each energy measuring unit/electronic
multi-measuring instrument.
In the system configuration, the energy measuring unit/
electric multi-measuring instrument with the station number
set with the host address must be included. The station
number can be set without regard to the cable connection
order. There is no problem even if station numbers are not
consecutive.
Station
GOT
No.3
Examples of station number setting
Station Station
No.15 No.1