(c) Routing setting
Up to 64 [Target Network No.]s can be set.
However, the same transfer network number
cannot be set twice or more (multiple times).
Therefore, the one that can access to other station
from the request source host GOT is 64 kinds of
[Target Network No.]s.
Target Network No.
Relay Network No.
Relay Station No.
Routing parameter setting of request source
Routing parameter setting is also necessary for the
request source GOT.
For the setting, refer to the following.
11.3.3 Routing parameter setting
11 - 18
11. CC-Link IE CONTROLLER NETWORK CONNECTION
11.4 PLC Side Setting
1 to 239
1 to 239
1 to 120
(2) [Controller Setting] of GT Designer3
Network type of the GOT side
When the network is in the extended mode, be sure to
set the network type of the GOT side to [CC IE Control
For [Controller Setting], of GT Designer3, refer to the
11.3.1 Setting communication interface
CC IE Control extended mode
1: Network No.1
2: Station No.2
Online (auto. reconnection)
1ms (Use default value)
3times (Use default value)
3sec (Use default value)
0ms (Use default value)
High (Normal) (Use default value)