Connecting To Cc-Link Module (Melsec Iq-R Series) With Ver.1 Compatible - Mitsubishi Electric GT1685 Connection Manual

13.4.1 Connecting to CC-Link module
(MELSEC iQ-R Series) with
Ver.1 compatible
This section describes the settings of the GOT and the CC-
Link module (MELSEC iQ-R Series) with Ver.1 compatible
in the following system configuration.
POINT POINT POINT
CC-Link module (MELSEC iQ-R Series)
For details of the CC-Link module (MELSEC iQ-R
Series), refer to the following manual.
Manuals of MELSEC iQ-R Series

System configuration
■ [Controller Setting] of GT Designer3
*1
<CC-Link module>
(Use the default value for the settings other than the following.)
Type : Master station
Station No. : Station No.0
Mode : Remote net (Ver.1 mode)
All connect count : 1
Transmission speed : 156kbps
■ Unit parameter setting of GX Works3
*1 The CC-Link module is mounted on the base unit slot 0.
The Start I/O No. of the CC-Link module is set to "0".
POINT POINT POINT
When the switch setting is changed
Turn the PLC CPU OFF then ON again, or reset the
PLC CPU.
<GOT>
(Use the default value for settings other
than the following.)
Station type : Intelligent device
station
Station No. : Station No.1
Number of
: Exclusive station 1
stations occupied
Transmission speed : 156kbps
13. CC-Link CONNECTION (INTELLIGENT DEVICE STATION)

Unit parameter setting of GX Works3
(1) Unit parameter
(a) Unit parameter
Item
Station type
Remote net (Ver.1
Mode
Station No.
*1
Transmission speed
Parameter setting Engineering tool
: Necessary
*1 Adjust the settings with GOT settings.
(b) Link refresh setting
Item
Special relay (SB) refresh
device
Special register (SW)
refresh device
Remote input (RX) refresh
device
Remote output (RY) refresh
Set as necessary.
device
Remote register (RWr)
refresh device
: Necessary
13.4 PLC Side Setting
Setting
necessity at
Set value
GOT
connection
Master station
mode)
0 (fixed)
156kbps
: As necessary : Not necessary
Setting
necessity at
Set value
GOT
connection
-
-
: As necessary : Not necessary
13 - 15
9
10
11
12
13
14
15
16