I/F Communication Setting - Mitsubishi Electric GT1685 Connection Manual

1.1.2

I/F communication setting

This function displays the list of the GOT communication interfaces.
Set the channel and the communication driver to the interface to be used.

Setting
1.
Select [Common]
2.
The I/F Communication Setting dialog box appears. Make the settings with reference to the following explanation.
POINT POINT POINT
When using the parameter reflection function of MELSOFT Navigator.
When setting [Controller Setting] in GT Designer3 using the parameter function of MELSOFT Navigator, all of I/F
Communication Setting are grayout and cannot be edited.Set these items at [Controller Setting] or [Peripheral Unit
Setting].
[I/F Communication Setting] from the menu.
1. PREPARATORY PROCEDURES FOR MONITORING
1.1 Setting the Communication Interface
1
2
3
4
5
6
7
8
1 - 13