Connection To Remote I/O Station In Melsecnet/H Network System - Mitsubishi Electric GT1685 Connection Manual

3.6 Connection to Remote I/O Station in MELSECNET/
H Network System
When connected to the remote I/O station of the MELSECNET/H network system, the GOT can monitor the PLC CPU of
the master station.
When connecting the GOT to the remote I/O station, use the following connection methods.
POINT POINT POINT
(1) Connection to remote I/O station of MELSECNET/B, (II) or /10
The GOT cannot be connected to the remote I/O station on the MELSECNET/B, (II) data link system and
MELSECNET/10 network system.
Connect the GOT to the remote I/O station on the MELSECNET/H network system.
Network No.1
Station No.1
(remote I/O station)
(2) Connection to GT11 and remote I/O station on MELSECNET/H
GT11 can not access the master station on MELSECNET/H network system.
GT11 can access only the connected host station (remote I/O station).
Monitor
target
MELSECNET/H remote I/O Network
GOT
(1) Direct CPU (2) Computer link
connection connection

3.6 Connection to Remote I/O Station in MELSECNET/H Network System

Network No.1
Station No.0
(master station)
Q33B
Q33B
Hub
GOT GOT
(3) Ethernet connection
3. ACCESS RANGE FOR MONITORING
1
2
3
4
5
6
7
8
3 - 19