By clicking [Setting], the [GOT (Ethernet) transparent
setting] is displayed.
Here, set the built-in Ethernet port CPU , which is
firstly connected via a GOT.
Specify the IP address for [IP address] same as the
IP address assigned to the built-in Ethernet port CPU.
The screen returns to Specify Connection Destination
Connection1. Click [Connection Test] to check if GX
Works3 has been connected to the FX5UCPU.
23 - 50
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting
(2) Connecting the GOT and PLC in direct CPU
[Specify Connection Destination] on
The [Specify Connection Destination 1] is displayed.
Set the [Specify Connection Destination 1]:
PC side I/F
PLC side I/F
Other Station Setting
Double-click [Serial USB] of the PC side I/F to display
[PC side I/F Serial Setting].
Check-mark either of the following in [PC side I/F
When connecting the GOT and PC with serial
Mark the [RS-232C] checkbox.
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
: Serial USB
: No Specification: