Lldp Transmit Receive - Allied Telesis x310-26FT Command Reference Manual

LLDP C
OMMANDS

LLDP TRANSMIT RECEIVE

lldp transmit receive
Overview This command enables transmission and/or reception of LLDP advertisements to
or from neighbors through the specified ports.
The no variant of this command disables transmission and/or reception of LLDP
advertisements through specified ports.
Syntax lldp {[transmit] [receive]}
no lldp {[transmit] [receive]}
Default LLDP advertisement transmission and reception are enabled on all ports by
default.
Mode Interface Configuration
Examples To enable transmission of LLDP advertisements on ports 1.0.1 and 1.0.6, use the
commands:
awplus#
awplus(config)#
awplus(config-if)#
To enable LLDP advertisement transmission and reception on ports 1.0.1 and 1.0.6,
use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable LLDP advertisement transmission and reception on ports 1.0.1 and 1.0.6,
use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related show lldp interface
Commands
C613-50103-01 REV A
Parameter Description
transmit
Enable or disable transmission of LLDP advertisements via this port
or ports.
receive
Enable or disable reception of LLDP advertisements via this port or
ports.
configure terminal
interface port1.0.1,port1.0.6
configure terminal
interface port1.0.1,port1.0.6
configure terminal
interface port1.0.1,port1.0.6
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
lldp transmit
lldp transmit receive
no lldp transmit receive
2334