Debug Ssh Client - Allied Telesis x310-26FT Command Reference Manual

S S (SSH) C
ECURE HELL OMMANDS

DEBUG SSH CLIENT

debug ssh client
Overview This command enables the SSH client debugging facility. When enabled, any SSH,
SCP and SFTP client sessions send diagnostic messages to the login terminal.
The no variant of this command disables the SSH client debugging facility. This
stops the SSH client from generating diagnostic debugging message.
Syntax debug ssh client [brief|full]
no debug ssh client
Default SSH client debugging is disabled by default.
Mode Privileged Exec and Global Configuration
Examples To start SSH client debugging, use the command:
awplus#
To start SSH client debugging with extended output, use the command:
awplus#
To disable SSH client debugging, use the command:
awplus#
Related debug ssh server
Commands
show ssh client
undebug ssh client
C613-50103-01 REV A
Parameter Description
brief
Enables brief debug mode.
full
Enables full debug mode.
debug ssh client
debug ssh client full
no debug ssh client
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2405