Lldp Notifications - Allied Telesis x310-26FT Command Reference Manual

LLDP C
OMMANDS

LLDP NOTIFICATIONS

lldp notifications
Overview This command enables the sending of LLDP SNMP notifications (traps) relating to
specified ports.
The no variant of this command disables the sending of LLDP SNMP notifications
for specified ports.
Syntax lldp notifications
no lldp notifications
Default The sending of LLDP SNMP notifications is disabled by default.
Mode Interface Configuration
Examples To enable sending of LLDP SNMP notifications for ports 1.0.1 and 1.0.6, use the
commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable sending of LLDP SNMP notifications for ports 1.0.1 and 1.0.6, use the
commands:
awplus#
awplus(config)#
awplus(config-if)#
Related lldp notification-interval
Commands
show lldp interface
snmp-server enable trap
C613-50103-01 REV A
configure terminal
interface port1.0.1,port1.0.6
lldp notifications
configure terminal
interface port1.0.1,port1.0.6
no lldp notifications
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2327