Table of Contents
Advertisement
LLDP C
OMMANDS
-
SHOW LLDP LOCAL
INFO
show lldp local-info
Overview
This command displays local LLDP information that can be transmitted through
specified ports. If no port list is entered, local LLDP information for all ports is
displayed.
show lldp local-info [base] [dot1] [dot3] [med] [interface
Syntax
<port-list>]
Mode
User Exec and Privileged Exec
Usage
Whether and which local information is transmitted in advertisements via a port
depends on:
•
•
Examples
To display local information transmitted via port 1.0.1, use the command:
awplus#
To display local information transmitted via all ports, use the command:
awplus#
Output
Figure 55-3: Example output from show lldp local-info
LLDP Local Information:
Local port1.1.1:
Chassis ID Type .................. MAC address
Chassis ID ....................... 0015.77c9.7453
Port ID Type ..................... Interface alias
Port ID .......................... port1.0.1
TTL .............................. 120
Port Description ................. [not configured]
C613-50103-01 REV A
Parameter
Description
base
Information for base TLVs.
dot1
Information for 802.1 TLVs.
dot3
Information for 802.3 TLVs.
med
Information for LLDP-MED TLVs.
<port-list>
The ports for which the local information is to be shown.
whether the port is set to transmit LLDP advertisements
receive
command)
which TLVs it is configured to send
med-tlv-select
command)
show lldp local-info interface port1.0.1
show lldp local-info
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
(lldp transmit
(lldp tlv-select
command,
lldp
2354
Advertisement
Table of Contents
