Table of Contents
Advertisement
RMON C
OMMANDS
SHOW RMON HISTORY
show rmon history
Overview
Use this command to display the parameters specified on all the currently defined
RMON history collections on the device.
NOTE
shown.
Syntax
show rmon history
Mode
User Exec and Privileged Exec
Output
Figure 57-2: Example output from the show rmon history command
NOTE
interfaces:
•
•
•
•
•
•
•
•
•
•
•
•
C613-50103-01 REV A
: Only the history for switch port interfaces, not for VLAN interfaces, can be
awplus#sh rmon history
history index = 56
data source ifindex = 4501
buckets requested = 34
buckets granted = 34
Interval = 2000
Owner Andrew
history index = 458
data source ifindex = 5004
buckets requested = 400
buckets granted = 400
Interval = 1500
Owner trev
========================================================
: The following etherStats counters are not currently available for Layer 3
etherStatsBroadcastPkts
etherStatsCRCAlignErrors
etherStatsUndersizePkts
etherStatsOversizePkts
etherStatsFragments
etherStatsJabbers
etherStatsCollisions
etherStatsPkts64Octets
etherStatsPkts65to127Octets
etherStatsPkts128to255Octets
etherStatsPkts256to511Octets
etherStatsPkts512to1023Octets
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2389
Advertisement
Table of Contents
