Table of Contents
Advertisement
S
S
(SSH) C
ECURE
HELL
OMMANDS
SHOW CRYPTO KEY USERKEY
show crypto key userkey
Overview
This command displays the public keys created on this device for the specified SSH
user.
show crypto key userkey <username> [dsa|rsa|rsa1]
Syntax
Mode
User Exec, Privileged Exec and Global Configuration
Examples
To show the public key generated for the user, use the command:
awplus#
To store the RSA public key generated for the user manager to the file "user.pub",
use the command:
awplus#
Output
Figure 58-4: Example output from the show crypto key userkey command
Table 4: Parameters in the output of the show crypto key userkey command
Related
crypto key generate userkey
Commands
C613-50103-01 REV A
Parameter
Description
<username>
User name of the local SSH user whose keys you wish to display. The
username must begin with a letter. Valid characters are all numbers,
letters, and the underscore, hyphen and full stop symbols.
dsa
Displays the DSA public key.
rsa
Displays the RSA public key used for SSH version 2 connections.
rsa1
Displays the RSA key used for SSH version 1 connections.
show crypto key userkey manager
show crypto key userkey manager rsa > manager-rsa.pub
Type Bits
Fingerprint
-------------------------------------------------------------
rsa
2048
e8:d6:1b:c0:f4:b6:e6:7d:02:2e:a9:d4:a1:ca:3b:11
rsa1 1024
12:25:60:95:64:08:8e:a1:8c:3c:45:1b:44:b9:33:9b
Parameter
Description
Type
The algorithm used to generate the key.
Bits
Length in bits of the key.
Fingerprint
Checksum value for the key.
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2413
Advertisement
Table of Contents
