Location Coord-Location Identifier - Allied Telesis x310-26FT Command Reference Manual

LLDP C
OMMANDS
-
LOCATION COORD LOCATION IDENTIFIER

location coord-location identifier

Overview Use this command to enter Coordinate Location Configuration mode for this
coordinate location.
Use the no variant of this command to delete a coordinate location. This also
removes the location from any ports it has been assigned to.
Syntax location coord-location identifier <coord-loc-id>
no location coord-location identifier <coord-loc-id>
Default By default there are no coordinate locations.
Mode Global Configuration
Usage Up to 400 locations can be configured on the switch for each type of location
information, up to a total of 1200 locations.
To configure this coordinate location, use the
configuration
ports, so that it can be advertised in TLVs from those ports, use the
coord-location-id
Examples To enter Coordinate Location Configuration mode to configure the coordinate
location with ID 1, use the commands:
awplus#
awplus(config)#
awplus(config-coord)#
To delete coordinate location 1, use the commands:
awplus#
awplus(config)#
Related location coord-location-id
Commands
location coord-location configuration
show lldp local-info
show location
C613-50103-01 REV A
Parameter
<coord-loc-id>
command. To associate this coordinate location with particular
command.
configure terminal
location coord-location identifier 1
configure terminal
no location coord-location identifier 1
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
A unique coordinate location identifier, in the range 1 to
4095.
location coord-location
location
2344