Download Abnormality; Front Alignment Hp Abnormality - Toshiba e-STUDIO477S Service Manual

Check item
Stapler
Stapler motor
Finisher control PC board
Parts to be replaced
Stapler home position sensor
Stapler motor
Finisher control PC board
[CC03] Download abnormality
Classification
Finisher related service call
Check item
Setting
[CC80] Front alignment HP abnormality
* If [EAF6] occurs two times consecutively, it becomes a [CC80] error.
Classification
Finisher related service call
Check item
Front alignment plate home
position sensor
Front alignment motor
Finisher control PC board
Parts to be replaced
Front alignment plate home
position sensor
Front alignment motor
Finisher control PC board
e-STUDIO477S/527S/477SL
ERROR CODE AND TROUBLESHOOTING
Measures
• Connector check (P9-1)
• Harness check
• Motor check (M9)
• Connector check (P9-1)
• Harness check
• Board check
• Connector check (J9, J10)
• Harness check
Remark
Error content

Download abnormality

Measures
Update the firmware again.
Error content

Front alignment HP abnormality

Measures
• Sensor check (S4)
• Connector check (P8-3)
• Harness check
• Motor check (M4)
• Connector check (P6-12)
• Harness check
• Board check
• Connector check (J6, J8)
• Harness check
Remark
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
5 - 34