Toshiba e-STUDIO206L Service Manual page 1251

Sub
05/08 Mode Element
element
08 Setting System General
mode
08 Setting System Initializatio Initialization of NIC
mode n information
08 Setting System All clearing
mode
08 Setting System General
mode
e-STUDIO206L/256/306/356/456/506
Item Subitem Code
9081
9083
9090
9100
Sub- Default Acceptable
Details
code value value
Initialization of -
department
management
information
Initialization of NIC -
information
Printer all clear -
Date and time setting - 13 digits
119
RAM Contents
- SYS Initializing of the department management information
* Key in the code and press the [INITIALIZE] button to
perform the initialization. If the area storing the
department management information is destroyed for
some reason, "Enter
Department Code" is displayed on the control panel
even if
the department management function is not set on. In
this case, initialize the area with this code. This area is
normally
initialized at the factory.
- SYS Returns the value to the factory shipping default value.
- M If the data of the self-diagnosis 05/08 code become
abnormal, performing 08-4582 can restore them. If not,
perform this code. All data of the self-diagnosis 05/08
code with "M" in the "RAM" field are initialized, except
the destination setting data. Perform this code if the
above problem occurs or the data of the self-diagnosis
05/08 code and the backup data are damaged after
replacing the LGC board and performing 08-4582.
Procedure:
1. Set 08-9000.
2. Perform 08-9090.
3. Perform 08-4581.
4. Set 08-9080 to "0".
If you have got the order wrong, repeat the procedure
from step 1. After this code is performed, it is necessary
to replace the developer material and to adjust the
autotoner sensor. Since the information of the PM
counter is initialized, enter it again as required.
- Year/month/date/day/hour/minute/second
Example:03 07 0 13 13 27 48 "Day" - "0" is for
"Sunday". Proceeds Monday through Saturday from "1"
to "6".
Proc Service
edure UI
3
3 Yes
3 Yes
5