Toshiba e-STUDIO206L Service Manual page 1290

Sub
05/08 Mode Element
element
05 Adjustmen Process Transfer Transfer cleaning bias
t mode adjustment
05 Adjustmen Process Transfer Transfer cleaning bias
t mode adjustment
05 Adjustmen Process Transfer Temperature/humidity
t mode sensor
05 Adjustmen Process Process Temperature/humidity
t mode sensor
05 Adjustmen Process Charger
t mode
e-STUDIO207L/257/307/357/457/507
Item Subitem Code
2083
2084
2192
2194
2196
Sub- Default Acceptable
Details
code value value
Positive Refer to 0~255
contents
Negative 41 0~255
Humidity display 50 0~100
Temperature display 25 0~50
Drum thermistor 25 0~100
temperature display
(K)
2
RAM Contents
M When the high-voltage transformer is replaced, the
transfer cleaning bias needs to be adjusted with this
code. The larger the setting value is, the higher the
value of the current (more positive) is. This causes a
reduction in the toner adhering to the transfer roller and
an improvement in the cleaning performance. Perform
this adjustment after the process units (cleaner and
developer unit) have been removed. When the high-
voltage transformer is replaced, adjusting with the
following codes needs to be performed in addition to
this adjustment.
05-2020, 05-2040, 05-2052, 05-2078
<Default value>
e-STUDIO207L/257/307: 63
e-STUDIO357/457/507: 96
M When the high-voltage transformer is replaced, the
transfer cleaning bias needs to be adjusted with this
code. The larger the setting value is, the higher the
value of the current (more negative) is. This causes a
reduction in the toner adhering to the transfer roller and
an improvement in the cleaning performance. Perform
this adjustment after the process units (cleaner and
developer unit) have been removed. When the high-
voltage transformer is replaced, adjusting with the
following codes need to be performed in addition to this
adjustment.
05-2020, 05-2040, 05-2052, 05-2078
M Displays the humidity value detected by
temperature/humidity sensor.
M Displays the humidity value detected by
temperature/humidity sensor.
M (Unit: °C)
Proc Service
edure UI
3
3
2 Yes
2 Yes
2 Yes