Toshiba e-STUDIO206L Service Manual page 1236

Sub
05/08 Mode Element
element
08 Setting System User
mode interface
08 Setting System User Default keyboard
mode interface setting
08 Setting System User Default keyboard
mode interface setting
08 Setting System Network
Mode
08 Setting System User
mode interface
08 Setting System Network
Mode
08 Setting System Network
Mode
08 Setting System Network
Mode
e-STUDIO206L/256/306/356/456/506
Item Subitem Code
8785
8786
8786
8788
8789
8790
8791
8792
Sub- Default Acceptable
Details
code value value
Display/Non-display Refer to
of pop-up for card contents
authentication
0 Japanese 3
1 Chinese 0
Detection interval 60 1-1440
when authentication
server is down
Display/Non-display 0
of pop-up for
automatic output of
jobs
Switchover of server 0
when authentication
server is down
Transition to sleep 1
mode after printing
Format of host name 0
used for Scan To
URL
104
RAM Contents
0-1 SYS Sets whether the pop-up is displayed or not after the
success of card authentication. This code is effective
when the value of 08-8727 is "1" (Enabled).
0: Does not display pop-up 1: Displays pop-up
<Default value>
JPD: 0
Others: 1
0-4 SYS Sets the default keyboard for inputting user name.
0: Romaji 1: Hiragana 2: Katakana (one-byte) 3:
Alphabetical character (one-byte) 4: Symbol (one-byte)
0-2 SYS Sets the default keyboard for inputting user name.
0: Alphabetical character (one-byte) 1: Pinyin 2:
Symbol (one-byte)
SSDK Sets the interval to access the authentication server
again after the detection of server down.
1-1440 (min.)
0-1 SYS Sets whether the pop-up is displayed or not when jobs
are automatically released after user authentication.
This code is effective when the value of 08-8915 is "1"
(Enabled).
0: Pop-up is not displayed 1: Pop-up is displayed
0-1 SSDK Enables/disables the function that switches the access
to another authentication server when it is detected that
the authentication server is down.
0: Disabled 1: Enabled
0-1 SYS This code sets whether the equipment shifts to the
sleep mode again immediately after completion of
printing when the equipment recovers from the super-
sleep mode for network printing.
0: Disabled
1: Enabled
0-2 SYS 0: IP address
1: Host name (FQDN)
2: NetBIOS name
Proc Service
edure UI
1
4
4
1
1
1
1
1