Toshiba e-STUDIO206L Service Manual page 1224

Sub
05/08 Mode Element
element
08 Setting System Paper Change of the paper
mode feeding size setting on the
touch panel when
printing is interrupted
by size mismatch
08 Setting System Counter
mode
08 Setting System Maintenan
mode ce
08 Setting System Maintenan
mode ce
08 Setting System Maintenan
mode ce
08 Setting System Maintenan
mode ce
08 Setting System LDAP user Attribute value setting
mode authenticat
ion
08 Setting System LDAP user Attribute value setting
mode authenticat
ion
08 Setting System Maintenan
mode ce
e-STUDIO206L/256/306/356/456/506
Item Subitem Code
8548
8549
8584
8585
8586
8587
8592
8593
8597
Sub- Default Acceptable
Details
code value value
PRT 0 0~1
Hardware key control 0 0~1
when external counter
is installed
Selects whether or 1 0~1
not to transmit the
Subject.
Selects the edit 1 0~1
setting of the Subject.
Selects whether or 1 0~1
not to add the date
and time to the
Subject.
Selects the setting of 0 0~1
the Subject, by using
the fixed string or
inputting the specified
one.
Sender address mail
Sender name uid
Updates the 0 0~1
Private/Hold Print job
list automatically
92
RAM Contents
SYS 0: Change of the paper size setting on the touch panel
is disabled.
1: Change of the paper size setting on the touch panel
is enabled.
SYS 0: No control 1: Mode switch key is disabled.
SYS 0: Disabled 1: Enabled
SYS 0: Disabled 1: Enabled
SYS 0: Not added 1: Added
SYS 0: Fixed string (Default) 1: Specified string
- SYS Sets the default attribute value of sender address.
Maximum 32 characters (ASCII).
- SYS Sets the default attribute value of sender name.
Maximum 32 characters (ASCII).
SYS 0: Disabled 1: Enabled
Proc Service
edure UI
1
1
1
1
1
1
11
11
1