Toshiba e-STUDIO206L Service Manual page 1288

Sub
05/08 Mode Element
element
08 Setting System Network
mode
08 Setting System Network
mode
08 Setting System User
mode interface
08 Setting System Maintenan
mode ce
08 Setting System User
Mode interface
08 Setting System Maintenan
mode ce
e-STUDIO206L/256/306/356/456/506
Item Subitem Code
9980
9981
9982
9984
9985
9987
Sub- Default Acceptable
Details
code value value
Address setting for 0
TO/CC/BCC at
authentication
Sending body text of 1 0~1
email
Switch of display 0 0~1
attribute of
[EXTENSION] icon
Document name in 0 0~1
printing/scanning
Screen displayed by 0
pressing MENU
button
Retention of fax 0 0~3
sending settings
156
RAM Contents
0-4 SYS Sets address of TO/CC/BCC when the user
authentication and E-mail authentication are enabled.
When the value of this code is set to "1", the address
specified as From Address is input to TO destination
field. TO/CC/BCC field cannot be edited.
When the value of this code is set to "2 to 4", the
address specified as From Address is input to each
field. TO/CC/BCC field can be edited by pressing the
TO/CC/BCC button.
0: Disabled
1: Fixed to TO field.
2: Added to TO field.
3: Added to CC field.
4: Added to BCC field.
SYS Sets whether the job information is output in the body
of e-mail when executing e-mail send job.
0: Disabled 1: Enabled
SYS 0: Touch is invalid when authentication is not
completed.
1: Touch is valid when authentication is not completed.
SYS 0: Not confidential name (default)
1: Confidential name
0-1 SYS 0: MENU screen
1: EWB screen
SYS Sets whether the fax sending settings are retained or
not.
0: Clears all settings (The authentication screen is
displayed if user authentication or department
management is enabled.)
1: Clears all
2: Clears only addresses
3: Retains all settings
* When the value of this code is set to "3", the value of
08-3847 (FAX mistransmission prevention) is
automatically set to "1" (Enabled).
Proc Service
edure UI
1
1
1
1
1
1