show policy validity period
Displays information about policy validity periods.
show policy validity period [name]
Syntax Definitions
name
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Information for all validity periods is displayed unless name is specified.
•
Use the
show policy rule
Examples
-> show policy validity period
ValidityPeriod
vp01
*Days
: tuesday thursday
*Months: january february
*Hours : 13:00 - 14:00
vp02
*Days
: monday wednesday
*Hours :
9:00 - 10:00
-> show policy validity period vp01
ValidityPeriod
vp01
*Days
: tuesday thursday
*Months: january february
*Hours : 13:00 - 14:00
output definitions
ValidityPeriod
From
page 39-204
The name of the validity period.
command to display the validity period that is associated with a policy rule.
From
cli
cli
From
cli
The name of the policy validity period, configured through the
validity period
command. A plus sign (+) preceding a policy rule name
indicates that the policy rule has been modified or has been created
since the last qos apply.
Where the validity period originated: cli indicates that the entry was
configured on the switch; ldap indicates the entry was configured
through PolicyView.
OmniSwitch CLI Reference Guide
QoS Policy Commands
policy
November 2009