Operator Cab - JLG G5-18A Operation Manual

2.5

OPERATOR CAB

The telehandler is equipped with an open or enclosed ROPS/FOPS cab.
Never operate telehandler unless the overhead guard, cab structure and right side
glass or screen are in good condition. Any modification to this machine must be
approved by JLG to assure compliance with ROPS/FOPS certification for this cab/
machine configuration. If the overhead guard or cab structure is damaged, the CAB
CANNOT BE REPAIRED. It must be REPLACED.
Never drill, cut, and/or weld to cab. Any modification to this machine must be
approved by JLG to assure compliance with machine configuration. If unauthorized
drilling, cutting and/or welding is present, the cab must be REPLACED.
31200743
Section 2 - Pre-Operation and Inspection
WARNING
WARNING
2-13