Boot Web-Package - H3C s3600 series Command Manual

View
User view
Parameters
file-url: Path or the name of the app file in the Flash memory, a string comprising 1 to 64 characters.
fabric: Specifies to apply the configuration to the whole fabric.
Description
Use the boot boot-loader backup-attribute command to configure an app file of the fabric or of a
device in the fabric to be with the backup attribute. The app file specified by this command becomes the
backup startup file when the device starts up next time. When the main startup file is unavailable, the
backup startup file is used to start the switch.
If you execute the boot boot-loader backup-attribute command without the fabric keyword, the
configuration applies to the local unit only.
Before configuring the main or backup attribute for a file in the fabric, make sure the file already exists
on all devices in the fabric. This is because Ethernet switches do not allows you to specify an app file in
other unit's Flash memory as the app startup file of the local unit.
Examples
# Configure the file backup.bin to be the backup startup file of the fabric.
<Sysname> boot boot-loader backup-attribute backup.bin fabric
Set boot file backup-attribute successfully on unit 1!
Set boot file backup-attribute successfully on unit 2!

boot web-package

Syntax
boot web-package webfile { backup | main }
View
User view
Parameters
webfile: Name of a Web file, a string comprising 5 to 127 characters (including the extension .web).
main: Specifies the file to be with the main attribute.
backup: Specifies the file to be with the backup attribute.
1-19