Login Statistics - Dell Z9500 Command Reference Manual

When you try to create more than the permitted number of sessions, the following
message appears, prompting you to close one of your existing sessions. Close any
of your existing sessions to log in to the system.
$ telnet 10.11.178.14
Trying 10.11.178.14...
Connected to 10.11.178.14.
Escape character is '^]'.
Login: admin
Password:
Maximum concurrent sessions for the user reached.
Current sessions for user admin:
Line
2
3
4
5
Clear existing session? [line number/Enter to cancel]:
Related

login statistics

Commands
terminal lines.
show login statistics
or virtual terminal lines to log in to the system.
login statistics
Enable and configure user login statistics on console and virtual terminal lines.
Syntax
login statistics {enable | time-period days}
no login statistics {enable | time-period days}
Parameters
enable
time-period
days
Defaults Not configured
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Control and Monitoring
Location
vty 0 10.14.1.97
vty 1 10.14.1.97
vty 2 10.14.1.97
vty 3 10.14.1.97
— Enable and configure user login statistics on console and virtual
— Displays login statistics of users who have used the console
Enables user login statistics. By default, the system displays
the login statistics for the last 30 days.
Sets the number of days for which the system stores the user
login statistics. The range is from 1 to 30.
123