Show Asf - Dell Z9500 Command Reference Manual

S9
S10

show asf

View statistics about the Alternate Store and Forward (ASF) packets that are transmitted on Z9500 line
cards.
Z9500
Syntax
show asf linecard slot-id
Parameters
linecard slot-id
Defaults all
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
7.5.1.0
6.2.1.1
Example
Dell#show asf linecard 0
Processor : CP
--------------
Received 100% traffic on TenGigabitEthernet 2/2 Total packets:
100
LLC:0, SNAP:0, IP:100, ARP:0, other:0
Unicast:100, Multicast:0, Broadcast:0
Processor : RP1
---------------
Received 62% traffic on TenGigabitEthernet 2/2 Total packets:
500
LLC:0, SNAP:0, IP:500, ARP:0, other:0
Control and Monitoring
93 86
93 86
Enter the slot ID of a Z9500 line card. The range of slot IDs is
from 0 to 2.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series
Introduced on the E-Series.
100 95
100 95
105
105
135