Plot Mode - Mapview Screen Area - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

MapView Interactive Display Feature

Plot Mode - MapView Screen Area

The plot mode of MapView is available as the Plot page in an application program and can

be used to view the results of the application program. Results are shown in black, all other

information, that is displayable, is shown in grey.

Refer to "33.2 Accessing MapView" paragraph "Example access for plot mode:".

As a part of an application program, for example, COGO.

The COGO XX Results, Plot page is used as the example below. The functions described

are the same for all Plot pages.

The softkeys described below are specific to MapView in plot mode. Refer to "33.4.1

Softkeys" for descriptions of the standard softkeys.

SHIFT FACE (F1) and SHIFT PLAN (F1)

Available in REFPLANE XX Reference

Plane, Plot page. To change between the face

and the plane view of the plane.

SHIFT FIT R (F4)

To fit the results in the screen area.

SHIFT RFRSH (F5)

To refresh the screen.