Plot 1 - Relative To Boat; Modifying The Active Route Using The Plot Screen - Leica MX400 Operating Instructions Manual

Plot

PLOT 1 - Relative To Boat

The information in PLOT1 is always relative to your present
position. The boat always remains in the center of the screen and
the bearing and range is always from your present position to the
next waypoint identified in RTE1.

Modifying The Active Route Using The Plot Screen

Press the E key to modify the screen to your needs.
You will notice that a magnifying glass icon appears in the middle
of the screen. This icon is used to identify waypoints and symbols
which appear on the plot screen. Use the cursor key to move the
magnifying glass around. Zooming out allows you to move the
magnifying glass over long distances at a faster rate. When the icon
is on a symbol, it identifies the symbol in the text area under the
description of Watching:. This information includes the Waypoint
Bank storage location (WPT 25), the waypoint description which
you gave it, the waypoint coordinates and datum which it is stored
in and your present bearing and range to this location (as opposed
to the waypoint you are traveling towards in your active route).
If you want to alter your present course, you can do it very quickly
from here.
Version 3.3
Operator's Manual
77