Show Tacacs Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring TACACS+
Mode
Switch command, Read‐Only.
Example
This example shows how to display all TACACS configuration information:
Matrix(ro)->show tacacs
TACACS+ state:
TACACS+ session accounting state:
TACACS+ command authorization state:
TACACS+ command accounting state:
TACACS+ single-connect state:
TACACS+ service:
TACACS+ session authorization A-V pairs:
TACACS+ Server
--------------
1
Table 25‐5 provides an explanation of the command output.
Table 25-5 show tacacs Output Details
Output...
TACACS+ state
TACACS+ session accounting
state
TACACS+ command
authorization state
TACACS+ command accounting
state
TACACS+ singleconnect state
TACACS+ service
TACACS+ session authorization
A-V pairs
TACACS+ Server
25-64 Authentication Configuration
access level attribute
read-only 'priv-lvl'
read-write 'priv-lvl'
super-user 'priv-lvl'
IP Address
---------------
10.1.26.245
What it displays...
Whether the TACACS+ client is enabled or disabled.
Whether TACACS+ session accounting is enabled or disabled.
Whether TACACS+ command authorization is enabled or disabled.
Whether TACACS+ command accounting is enabled or disabled.
Whether TACACS+ singleconnect is enabled or disabled.
When enabled, the TACACS+ client sends multiple requests over a
single TCP connection.
The name of the service that is requested by the TACACS+ client for
session authorization. "exec" is the default service name.
Displays the attribute – value pairs that are mapped to the Matrix read-
only, read-write, and super-user access privilege levels for the
service requested for session authorization.
The attribute names and values shown in the example above are the
default values.
Displays the TACACS+ server information used by the TACACS+
client.
enabled
disabled
disabled
disabled
disabled
exec
Port Timeout Status
----- ------- -------
49 10 Active
show tacacs
value
'0'
'1'
'15'