Set Macauthentication Reauthentication; Set Macauthentication Portreauthenticate - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring MAC Authentication
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to force the MAC authentication session for address 00‐60‐97‐b5‐4c‐07 to
re‐initialize:
Matrix(rw)->set macauthentication macinitialize 00-60-97-b5-4c-07

set macauthentication reauthentication

Use this command to enable or disable reauthentication of all currently authenticated MAC
addresses on one or more ports.
Syntax
set macauthentication reauthentication {enable | disable} port-string
Parameters
enable | disable
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to enable MAC reauthentication on ge.4.1 though 5:
Matrix(rw)->set macauthentication reauthentication enable ge.4.1-5

set macauthentication portreauthenticate

Use this command to force an immediate reauthentication of the currently active sessions on one
or more MAC authentication ports.
Syntax
set macauthentication portreauthenticate port-string
25-34 Authentication Configuration
Enables or disables MAC reauthentication.
Specifies port(s) on which to enable or disable MAC reauthentication.
For a detailed description of possible port‐string values, refer to "Port
String Syntax Used in the CLI" on page 4‐2.
set macauthentication reauthentication