Show Ip Slb Serverfarms - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Load Sharing Network Address Translation (LSNAT)
Table 19-1 LSNAT Configuration Task List and Commands (continued)
Task
Associate a virtual server with a server farm.
Configure a virtual server IP address (VIP).
Enable a virtual server for service.
(Optional) Restrict access to specific virtual server clients. client ("client" on page 19-24)
(Optional) Specify the type of session persistence and
timeout. Default is TCP. (See "Session Persistence" on
page 19-2 for more information.)
(Optional) Allow specific clients direct access to a real
server without using LSNAT.
Configure global direct access:
(Optional) Allow all clients to directly access all services
provided by real servers, EXCEPT FOR those services
configured to be accessed through a configured virtual
server. (See "Configuring Direct Access to Real Servers"
on page 19-3 for more information.)
Display or clear server load balancing connections and statistics:
(Optional) Display server load balancing connections and
statistics.
(Optional) Display SLB active sticky persistence
connections.
(Optional) Clear server load balancing connections or
statistics.
Display and set chassis-based LSNAT limits:
(Optional) Display and set chassis-based LSNAT address
translation limits, from the switch CLI.
Note: These commands must be executed from the
switch CLI.

show ip slb serverfarms

Use this command to display server load balancing server farm information.
Syntax
show ip slb serverfarms [detail | serverfarmname [detail]]
19-6 LSNAT Configuration
Use these commands...
serverfarm ("serverfarm (Virtual
page 19-22)
virtual ("virtual" on page 19-22)
inservice ("inservice (virtual
page 19-24)
persistence level ("persistence
page 19-25)
allow accessservers ("allow
page 19-27)
ip slb allowaccess_all ("ip slb
on page 19-28)
show ip slb conns ("show ip slb
page 19-29)
show ip slb stats ("show ip slb
page 19-30)
show ip slb sticky ("show ip slb
page 19-31)
clear ip slb ("clear ip slb" on page 19-32)
show router limits ("show router limits
on page 19-32)
set router limits ("set router limits
page 19-33)
clear router limits ("clear router limits
on page 19-34)
show ip slb serverfarms
Server)" on
server)" on
level" on
accessservers" on
allowaccess_all"
conns" on
stats" on
sticky" on
(LSNAT)"
(LSNAT)" on
(LSNAT)"