Ip Twcb Redirect Out - Enterasys Matrix DFE-Gold Series Configuration Manual

ip twcb redirect out

Parameters
begin‐ip‐address
end‐ip‐address
Defaults
None.
Mode
Router command, Cache Server Configuration mode: Matrix(rw)‐>Router(config‐twcb‐
webcache)#.
Usage
You can explicitly specify end user clients whose HTTP requests are or are not redirected to the
cache servers. If you do not explicitly specify such addresses, HTTP requests from all end users
are redirected to the cache server.
Example
This example configures a deny list for end users 10.10.10.26 through 10.10.10.50 to have HTTP
requests redirected to this web‐cache:
Matrix(rw)->Router(config)#ip twcb webcache cache1
Matrix(rw)->Router(config-twcb-webcache)#hosts deny redirect range 10.10.10.26
10.10.10.50
ip twcb redirect out
Use this command to redirect outbound HTTP traffic from an interface to the cache servers.
Syntax
ip twcb webcache-name redirect out
Parameters
webcache‐name
Defaults
None.
Mode
Router command, Interface Configuration mode: Matrix>Router(config‐if(Vlan 1))#.
Usage
The outbound interface is typically an interface that connects to the Internet. Associate the
specified web‐cache to the indicated VLAN for redirection of HTTP traffic. Up to 3 interfaces can
be associated with a web‐cache.
Specifies an IP address that begins a range to explicitly permit or deny
redirection of HTTP requests from these end users to this web‐cache.
Specifies an IP address that ends a range to explicitly permit or deny
redirection of HTTP requests from these end users to this web‐cache.
Specifies the name of the web‐cache to redirect outbound HTTP traffic
to.
Enterasys Matrix DFE-Gold Series Configuration Guide 23-11
Understanding Transparent Web Cache Balancing (TWCB)