clear router limits (LSNAT)
Mode
Switch command, Read‐Write.
Usage
This command must be executed from the switch CLI.
Example
This example shows how to reset all chassis‐based LSNAT limits:
Matrix(rw)->clear router limits
Note: Router limits can also be cleared in the following contexts:
To clear NAT router limits see
To clear TWCB router limits see
Configuring Load Sharing Network Address Translation (LSNAT)
"clear router limits
(NAT)" on page 18-16.
"clear router limits
(TWCB)" on page 23-17.
Enterasys Matrix DFE-Gold Series Configuration Guide 19-35