Show Radius-Snooping Port; Radius-Snooping Settings - Enterasys Matrix DFE-Gold Series Configuration Manual

Understanding RADIUS Snooper
Example
This example shows how to display RADIUS configuration information:
Matrix(rw)->show radius-snooping
RADIUS Snooping: Enabled
Number of configured flows:
Active sessions: 12
Enabled ports: fe.1.1-fe.1.8; fe.1.22
Table 26-1 Radius-Snooping Settings
Output...
RADIUS Snooping
Number of configured flows
Active sessions
Enabled ports

show radius-snooping port

Use this command to display both a general overview of the global RS status as well as the per
port RS status for the port(s) specified.
Syntax
show radius-snooping port port-string
Parameters
port‐string
Defaults
None.
Mode
Read‐Only.
Example
This example displays the RS status for port fe.1.1:
Matrix(rw)->show radius-snooping port fe.1.1
Radius-Snooping: Enabled
Port
fe.1.1 disabled
26-8 RADIUS Snooping Configuration
What it displays...
Specifies whether RS is globally enabled or disabled.
Specifies the number of globally configured flows for this system.
Specifies the number of active sessions for this system.
Specifies the ports RS is currently enabled on.
Specifies the port for status to be displayed.
Port State Timeout Drop State Allowed Allocated
40 enabled
2
1024 1024
show radius-snooping port