Set Pwa Displaylogo; Set Pwa Redirecttime - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Port Web Authentication (PWA)
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset the PWA login banner to a blank string
Matrix(rw)->clear pwa banner

set pwa displaylogo

Use this command to set the display options for the Enterasys Networks logo.
Syntax
set pwa displaylogo {display | hide}
Parameters
display | hide
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to hide the Enterasys Networks logo:
Matrix(rw)->set pwa displaylogo hide

set pwa redirecttime

Use this command to set the PWA login success page redirect time.
Syntax
set pwa redirecttime time
Parameters
time
25-18 Authentication Configuration
Displays or hides the Enterasys Networks logo when the PWA website
displays.
Specifies the number of seconds before the user will be redirected to the
PWA home page after successful login. Valid values are 0 ‐ 120.
set pwa displaylogo