Predictor - Enterasys Matrix DFE-Gold Series Configuration Manual

predictor

Defaults
None.
Mode
Router command, SLB Server Farm Configuration mode: Matrix>Router(config‐slb‐sfarm)#
Usage
For backwards compatibility, entering a port number is optional for TCP session persistence only.
However, the recommended procedure is to always configure a port number for a real server.
All real servers in the same server farm should be configured to use the same port.
The "no" form of this command removes the server from the server farm.
Example
This example shows how to add a real server 10.1.2.3 to the server farm named "httpserver" and
to configure the port number to be used for the service provided by this server:
Matrix>Router(config)#ip slb serverfarm httpserver
Matrix>Router(config-slb-sfarm)#real 10.1.2.3 port 80
Matrix>Router(config-slb-real)#
predictor
Use this command to specify which load balancing algorithm to use for selecting a real server in
an LSNAT server farm.
Syntax
predictor [roundrobin | leastconns]
no predictor
Parameters
roundrobin |
leastconns
Defaults
If not specified, Round Robin will be used as the selection algorithm.
Mode
Router command, SLB Server Farm Configuration mode: Matrix>Router(config‐slb‐sfarm)#
Usage
The "no" form of this command resets the selection algorithm to Round Robin.
Configuring Load Sharing Network Address Translation (LSNAT)
(Optional) Specifies Round Robin or Least Connections as the selection
algorithm.
Enterasys Matrix DFE-Gold Series Configuration Guide 19-9