show spantree spanguardlock
show spantree spanguardlock
Use this command to display the span guard lock status of one or more ports.
Syntax
show spantree spanguardlock port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the span guard lock status for ge.2.1:
Matrix(rw)->show spantree spanguardlock ge.2.1
spanguard status for port ge.2.1 is UNLOCKED.
clear / set spantree spanguardlock
Use either of these commands to unlock one or more ports locked by the Spanning Tree span
guard function.
Syntax
clear spantree spanguardlock port-string
set spantree spanguardlock port‐string
Parameters
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
When span guard is enabled, it locks ports that receive BPDUs when those ports have been
defined as edge (user) ports (as described in "set spantree adminedge" on page 6‐60).
Specifies the port(s) for which to show span guard lock status. For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐2.
Specifies port(s) to unlock. For a detailed description of possible port‐
string values, refer to "Port String Syntax Used in the CLI" on page 4‐2.
Enterasys Matrix DFE-Gold Series Configuration Guide 6-39
Configuring Spanning Tree Bridge Parameters