Set Mac; Show Mac Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Enterasys networks switch configuration guide
Table of Contents

Advertisement

set mac

Matrix(rw)->show mac port-string fe.1.3
MAC Address
----------------- ---- ------------- ------- -------
00-01-F4-32-88-C5 0
00-00-1D-12-11-88 3
Table
12‐3 provides an explanation of the command output.
Table 12-3 show mac Output Details
Output...
MAC Address
FID
Port
Type
Status
set mac
Use this command to set the timeout period for aging learned MAC entries, to define what ports a 
multicast address can be dynamically learned on or flooded to, and to make a static entry into the 
filtering database(s).
Syntax
set mac [agetime time] | [multicast mac-address vlan-id [port-string] {append |
clear}] | [unicast mac-address fid receive-port [ageable]] [unicast-as-multicast
{enable | disable}]
Parameters
agetime time
multicast mac‐address 
vlan‐id [port‐string] 
{append | clear}]
FID
Port
Type
fe.1.3
self
fe.1.3
mgmt
What it displays...
MAC addresses mapped to the port(s) shown.
Filter database identifier.
Port designation.
Address type. Valid types are:
• other - entry is other than below
• invalid - entry is no longer valid, but has not been yet flushed-out
• learned - entry has been learned and is currently used
• self - entry represents one of the device's address
• mgmt - entry represents a dot1qStaticUnicastAddress (manually
entered MAC address)
• mcast - entry represents a dot1qStaticMulticastAddress
Address status. Valid types are:
• other - entry is other than below
• invalid - entry shall be removed
• perm - entry is currently in use and shall remain so AFTER the next
reset (permanent)
Specifies the timeout period in seconds for aging learned MAC 
addresses. Valid values are 10 to 65535.
This command allows you to limit specific layer two multicast 
mac-address
addresses (
vlan-id
(
). You can later come back and append or clear ports from the 
list of ports the multicast MAC address is allowed to be dynamically 
learned on or flooded to.
Managing Switch Network Addresses and Routes
Status
perm
port-string
) to specific ports (
Enterasys Matrix DFE-Gold Series Configuration Guide 12-11
) within a VLAN 

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents