Show Igmp Flows; Show Igmp Counters - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring IGMP
lag.0.2
lag.0.2
lag.0.2
lag.0.4
lag.0.4

show igmp flows

Use this command to display IGMP flow information.
Syntax
show igmp flows [portlist portlist] [group group] [vlan-list vlan-list] [sip sip]
Parameters
portlist portlist
group group
vlan‐list vlan‐list
sip sip
Defaults
If no parameters are specified, information for all IGMP flows is displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display all the IGMP flow information:
Matrix(rw)->show igmp counters
Multicast Flows
Src Port
-----------------------------------------------
fe.1.20
fe.1.36

show igmp counters

Use this command to display IGMP counter information.
Syntax
show igmp counters
Parameters
None.
9-16 IGMP Configuration
239.255.12.43 1
239.255.255.250 1
239.255.255.250 20
235.80.68.83 20
239.255.255.250 20
(Optional) Port or range of ports.
(Optional) Group IP address (none means show all groups)
(Optional) VLAN ID or range of IDs (1‐4094)
(Optional) Source IP address (none means show all sips)
Group Address Vlan
224.1.1.1 1
224.1.1.2 1
Any 253
Any 255
Any 249
Any 237
Any 243
Src IP
45.67.89.23
39.47.23.67
show igmp flows
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC