Show Rmon Host - Enterasys Matrix DFE-Gold Series Configuration Manual

show rmon host

show rmon host
Use this command to display RMON properties and statistics associated with each host
discovered on the network.
Syntax
show rmon host [port-string] [address | creation]
Parameters
port‐string
address | creation
Defaults
• If port‐string is not specified, information about all ports will be displayed.
• If address or creation are not specified, entries will not be sorted.
Mode
Switch command, Read‐Only.
Example
This example shows how to display RMON host properties and statistics. A control entry displays
first, followed by actual entries corresponding to the control entry. For a description of the types of
statistics shown, refer to Table
Matrix(rw)->show rmon host
------------------
Host Index
Interface
Table size
Last deletion 766048
Status
Owner
Host 00-00-5e-00-01-01
In Pkts
Out Pkts
In Octets
Out Octets
Broadcast Pkts 0
Multicast Pkts 0
Host 00-00-f6-00-86-6d
In Pkts
Out Pkts
In Octets
(Optional) Displays RMON properties and statistics for specific port(s).
(Optional) Sorts the display by MAC address or creation time of the
entry.
11‐3:
1
21009
100
1
monitor
Creation Order 22
0
1
0
66
Creation Order 74
0
2
0
Enterasys Matrix DFE-Gold Series Configuration Guide 11-27
Configuring RMON