Clear Cos Port-Resource Irl; Set Cos Port-Resource Txq - Enterasys Matrix DFE-Gold Series Configuration Manual

clear cos port-resource irl

clear cos port-resource irl
Use this command to clear one or all Class of Service inbound rate limiting port resource
configurations:
Syntax
clear cos port-resource irl all | group-type-index resource [unit] [rate] [type]
[syslog] [trap] [disable-port] [violators port-list]
Parameters
all | group‐type‐index
resource
unit
rate
type
syslog
trap
disable‐port
violators port‐list
Defaults
If no options are specified, all non‐default settings will be cleared for the associated rate limiter.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear all inbound rate limiting settings associated with port group 0.1,
resource entry 0:
Matrix(rw)->clear cos port-resource irl 0.1 0

set cos port-resource txq

Use this command to configure a Class of Service transmit queue port resource entry.
Syntax
set cos port-resource txq group-type-index transmit-queue {[unit {percentage |
kbps | mbps | gbps}] [rate rate] [algorithm {tail-drop}]}
Clears all inbound rate limiting port resource entries or a specific entry.
Specifies a resource entry to be cleared.
(Optional) Clears the unit of measure setting.
(Optional) Clears the data rate setting.
(Optional) Clears the type of action setting.
(Optional) Clears the Syslog setting.
(Optional) Clears the SNMP trap setting.
(Optional) Clears the disable port setting.
(Optional) Clears the limit violation setting.
Enterasys Matrix DFE-Gold Series Configuration Guide 8-33
Configuring Policy Class of Service (CoS)