set macauthentication macreauthenticate
Parameters
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to force ge.2.1 though 5 to reauthenticate:
Matrix(rw)->set macauthentication portreauthentication ge.2.1-5
set macauthentication macreauthenticate
Use this command to force an immediate reauthentication of a MAC address.
Syntax
set macauthentication macreauthenticate mac_addr
Parameters
mac_addr
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to force the MAC authentication session for address 00‐60‐97‐b5‐4c‐07 to
reauthenticate:
Matrix(rw)->set macauthentication macreauthenticate 00-60-97-b5-4c-07
set macauthentication reauthperiod
Use this command to set the MAC reauthentication period (in seconds).
Syntax
set macauthentication reauthperiod time port-string
Specifies MAC authentication port(s) to be reauthenticated. For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐2.
Specifies the MAC address of the session to reauthenticate.
Enterasys Matrix DFE-Gold Series Configuration Guide 25-35
Configuring MAC Authentication