Show Multiauth Counters - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Multiple Authentication
Example
This example shows how to display multiple authentication session‐timeout values, for an active
session:
Matrix(su)->show multiauth
Multiple authentication system configuration
-------------------------------------------------
Supported types
Maximum number of users
Current number of users
System mode
Default precedence
Admin precedence
Operational precedence

show multiauth counters

Use this command to display multiauth counter values.
Syntax
show multiauth counters [[cep | dot1x | mac | pwa][chassis | port portstring]]
[[chassis [cep | dot1x | mac | pwa]] [port portstring]
Parameters
portstring
Defaults
Displays multiauth counter information for all parameters.
Mode
Switch command, Read‐Only.
Example
This example shows how to display multiple authentication session‐timeout values, for an active
session:
Matrix(su)->show multiauth counters
Location
chassis
ge.1.1
ge.1.2
.
.
.
lag.0.45
27-4 MultiAuth Configuration
: dot1x, pwa, mac, cep
: 2048
: 1
: multi
: dot1x, pwa, mac, cep
: dot1x, mac, pwa, cep
: dot1x, mac, pwa, cep
Specifies a port or range of ports to display.
Authentication Type
dot1x pwa
---------- ---------- ---------- ----------
0 0
0 0
0 0
0 0
mac cep
0 0
0 0
0 0
0 0
show multiauth counters