Clear Port Lacp - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring LACP
partners maintain current status of the other via LACPDUs containing information about their
ports' LACP status and operational state.
Example
This example shows how to set the actor admin key to 3555 for port ge.3.16:
Matrix(rw)->set port lacp ge.3.16 aadminkey 3555

clear port lacp

Use this command to clear link aggregation settings for one or more ports.
Syntax
clear port lacp port port-string {[aadminkey] [aportpri] [asyspri] [aadminstate
{lacpactive | lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef
| lacpexpire | all}] [padminsyspri] [padminsysid] [padminkey] [padminportpri]
[padminport] [padminstate {lacpactive | lacptimeout | lacpagg | lacpsync |
lacpcollect | lacpdist | lacpdef | lacpexpire | all}]}
Parameters
port port‐string
aadminkey
aportpri
asyspri
aadminstate
lacpactive |
lacptimeout | lacpagg
| lacpsync |
lacpcollect | lacpdist
| lacpdef | lacpexpire
| all
padminsyspri
padminsysid
padminkey
padminportpri
padminport
padminstate
lacpactive |
lacptimeout | lacpagg
| lacpsync |
lacpcollect | lacpdist
| lacpdef | lacpexpire
| all
Defaults
None.
4-68 Port Configuration
Specifies the physical port(s) on which LACP settings will be cleared.
For a detailed description of possible port‐string values, refer to "Port
String Syntax Used in the CLI" on page 4‐2.
Clears a port's actor admin key.
Clears a port's actor port priority.
Clears the port's actor system priority.
Clears a port's specific actor admin state, or all actor admin state(s). For
descriptions of specific states, refer to the set port lacp command ("set
port lacp" on page 4‐66.)
Clears the port's default partner priority value.
Clears the port's default partner system ID.
Clears the port's default partner admin key.
Clears the port's default partner port priority.
Deletes a partner port from the LACP configuration.
Clears the port's specific partner admin state, or all partner admin
state(s).
clear port lacp