Enterasys Matrix DFE-Gold Series Configuration Manual page 500

Configuring SMON
Parameters
port‐string
Defaults
If port‐string is not specified, VLAN statistics counting configurations will be cleared for all ports.
Mode
Switch command, Read‐Write.
Example
This example shows how clear an SMON VLAN statistics counting configuration from 1‐Gigabit
Ethernet source port 14 in module 3:
Matrix(rw)->clear smon vlan ge.3.14
11-12 Network Monitoring Configuration
(Optional) Clears statistics counting configuration(s) for specific port(s).
For a detailed description of possible port‐string values, refer to "Port
String Syntax Used in the CLI" on page 4‐2.
clear smon vlan