Ip Slb Ftpctrlport - Enterasys Matrix DFE-Gold Series Configuration Manual

ip slb ftpctrlport

Parameters
detail
serverfarmname
Defaults
If no parameter is specified, summary information for all configured server farms will be
displayed.
Mode
Router command, Any router mode.
Example
This example shows how to display LSNAT server farm summary information:
Matrix Router(config)#>show ip slb serverfarms
server-farm
------------------------------------------------------------------------------
matrix
ftpserver
ten
big
ip slb ftpctrlport
Use this command to specify an FTP control port for load balancing functionality. By default, this
is port 21.
Syntax
ip slb ftpctrlport port-number
no ip slb ftpctrlport
Parameters
port‐number
Defaults
None.
Mode
Router command, Global configuration mode: Matrix>Router(config)#
Usage
The "no" form of this command resets the FTP control port to 21.
Configuring Load Sharing Network Address Translation (LSNAT)
(Optional) Displays detailed output for a specific server farm or for all
configured server farms.
(Optional) Specifies a server farm name for which to display
information.
predictor
LEASTCONNECTION
ROUNDROBIN
ROUNDROBIN
ROUNDROBIN
Specifies an FTP port number
Enterasys Matrix DFE-Gold Series Configuration Guide 19-7
status rserver
ACTIVE 2
ACTIVE 2
ACTIVE 3
ACTIVE 1
rserver
2
2
3
1