Configuring Load Sharing Network Address Translation (LSNAT)
Example
This example shows how to specify port 46 as the FTP control port for server load balancing:
Matrix>Router(config)#ip slb ftpctrlport 46
ip slb serverfarm
Use this command to identify an LSNAT server farm and enable server load balancing (SLB)
server farm configuration mode.
Syntax
ip slb serverfarm serverfarmname
no ip slb serverfarm serverfarmname
Parameters
serverfarmname
Defaults
None.
Mode
Router command, Global configuration mode: Matrix>Router(config)#
Usage
The "no" form of this command deletes the server farm from the LSNAT configuration.
Example
This example shows how to identify a server farm named "httpserver" and enable configuration
mode for that server farm:
Matrix>Router(config)#ip slb serverfarm httpserver
Matrix>Router(config-slb-sfarm)#
real
Use this command to add a real LSNAT server to a server farm and to enable LSNAT real server
configuration mode.
Syntax
real ip-address port number
no real ip-address
Parameters
ip‐address
port number
19-8 LSNAT Configuration
Specifies a server farm name.
Specifies a server IP address.
Specifies a port number for this server.
ip slb serverfarm