set smon priority
------------------------
Interface = ge.3.14
Owner
Creation
Status
--------------------
Priority 0 Packets
----------
Total
Overflow
set smon priority
Use this command to create, start, or stop priority‐encoded SMON user statistics counting.
Syntax
set smon priority {create | enable | disable} port-string [owner]
Parameters
create | enable |
disable
port‐string
owner
Defaults
If owner is not specified, none will be applied.
Mode
Switch command, Read‐Write.
Example
This example shows how set the device to gather SMON priority statistics from 1‐Gigabit Ethernet
port 14 in module 3:
Matrix(rw)->set smon priority ge.3.14
clear smon priority
Clears priority‐encoded user statistics on one or more ports.
Syntax
clear smon priority [port-string]
= none
= 0 days 0 hours 6 minutes 39 seconds
= enabled
7981308
0
Creates, enables, or disables SMON priority statistics counting. Create
automatically enables (starts) counters.
Specifies one or more source ports on which to collect statistics. For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐2.
(Optional) Specifies an administratively assigned name of the owner of
this entity.
Octets
2332402460
0
Enterasys Matrix DFE-Gold Series Configuration Guide 11-9
Configuring SMON