Show Port Counters Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Reviewing Port Status
No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets
In Unicast Pkts
In Multicast Pkts
In Broadcast Pkts
In Discards
In Errors
In Unknown Protocol
Out Octets
Out Unicasts Pkts
Out Multicast Pkts
Out Broadcast Pkts
Out Errors
Out Queue Length
802.1Q Switch Counters
----------------------
Frames Received
Frames Transmitted
Frames Filtered
This example shows how to display all fe.3.1 port counter statistics related to traffic through the
device.
Matrix(rw)->show port counters fe.3.1 switch
Port: fe.3.1
No counter discontinuity time
802.1Q Switch Counters
-------------------------------------------
Frames Received
Frames Transmitted
Frames Filtered
Table 4‐2 provides an explanation of the command output.
Table 4-2 show port counters Output Details
Output...
Port
MIB2 Interface
Bridge Port
4-16 Port Configuration
Bridge Port: 2
What it displays...
Port designation. For a detailed description of possible port-string
values, refer to
MIB2 interface designation.
IEEE 802.1D bridge port designation.
0
0
0
0
0
0
0
0
0
0
0
0
256
0
0
0
0
0
0
"Port String Syntax Used in the
show port counters
CLI" on page 4-2.