show snmp context
View Type
Storage type
Row status
View Name
Subtree OID
Subtree mask
View Type
Storage type
Row status
View Name
Subtree OID
Subtree mask
View Type
Storage type
Row status
Table
5‐8 provides an explanation of the command output. For details on using the set snmp view
command to assign variables, refer to "set snmp view" on page 5‐24.
Table 5-8 show snmp view Output Details
Output...
View Name
Subtree OID
Subtree mask
View Type
Storage type
Row status
show snmp context
Use this command to display the context list configuration for SNMP's view‐based access control.
Syntax
show snmp context
Parameters
None.
Defaults
None.
= included
= nonVolatile
= active
= All
= 0.0
=
= included
= nonVolatile
= active
= Network
= 1.3.6.1.2.1
=
= included
= nonVolatile
= active
What it displays...
Name assigned to a MIB view.
Name identifying a MIB subtree.
Bitmask applied to a MIB subtree.
Whether or not subtree use must be included or excluded for this
view.
Whether storage is in nonVolatile or Volatile memory
Status of this entry: active, notInService, or notReady.
Enterasys Matrix DFE-Gold Series Configuration Guide 5-23
Configuring SNMP MIB Views