Clear Lldp Port Tx-Tlv - Enterasys Matrix DFE-Gold Series Configuration Manual

Enterasys networks switch configuration guide
Table of Contents

Advertisement

clear lldp port tx-tlv

tag 
vid 
cos 
dscp 
port-string
Defaults
At least one application (or all) and one policy parameter must be specified.
Mode
Switch command, Read‐Write.
Example
This example returns all network policy values for all applications on port ge.1.1 to their default 
values.
Matrix(rw)->clear lldp port network-policy all state tag vid cos dscp ge.1.1
clear lldp port tx-tlv
Use this command to clear the optional LLDP and LLDP‐MED TLVs to be transmitted in 
LLDPDUs by the specified port or ports to the default value of disabled.
Syntax
clear lldp port tx-tlv {[all] | [port-desc] [sys-name] [sys-desc] [sys-cap] [mgmt-
addr] [vlan-id] [stp] [lacp] [gvrp] [mac-phy] [poe] [link-aggr] [max-frame] [med-
cap] [med-pol] [med-loc] [med-poe]} port-string
Parameters
all
port‐desc
sys‐name
sys‐desc
sys‐cap
mgmt‐addr
(Optional) Clear the tag value of the application being configured to 
untagged.
(Optional) Clear the VLAN identifier for the port to the default value of 
1.
(Optional) Clear the Layer 2 priority to be used for the application being 
configured to the default value of 0. (A value of 0 represents use of the 
default priority as defined in IEEE 802.1D.)
(Optional) Clear the DSCP value to be used to provide Diffserv node 
behavior for the application being configured to the default value of 0. 
(A value of 0 represents use of the default DSCP value as defined in 
RFC 2475.)
Specifies the port or range of ports to be affected.
Disables all optional TLVs from being transmitted in LLDPDUs.
Disables the Port Description optional basic LLDP TLV from being 
transmitted in LLDPDUs.
Disables the System Name optional basic LLDP TLV from being 
transmitted in LLDPDUs. 
Disables the System Description optional basic LLDP TLV from being 
transmitted in LLDPDUs.
Disables the System Capabilities optional basic LLDP TLV from being 
transmitted in LLDPDUs. 
Disables the Management Address optional basic LLDP TLV from 
being transmitted in LLDPDUs. 
Enterasys Matrix DFE-Gold Series Configuration Guide 3-37
Link Layer Discovery Protocol and LLDP-MED

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents